Gimballed magnetic compass with mirror arrangement and magnification lense from below. Mounted in a binnacle on wheelhouse top to be clear from interfering magnetic fields. Removable hood without window. Height of compass card above deck level is 70mm. Card diameter of compass 160mm. 24VDC illumination from above.
REFLECTA/2/Fiberline is a reflector compass binnacle for worldwide use. It meets all important national and international specifications. Included in the range of delivery are all necessary components as magnetic reflector compass, azimuth device, reflection tube, correctors (only Flinder´s bar as extra) illumination, emergency illumination and installation material. If a vertical reflection tube a horizontal by-pass higher than 2m of length, the REFLECTA 2 must be chosen.
REFLECTA/3 is a smaller type of reflector compass binnacle with compass card of 160mm (diameter) also for worldwide use according to regulations.
The AlphaBinnacle H type is for commercial vessel over 150 GT, fishing vessels and workboats over 35 meter and naval vessels. Professional binnacle case for deck mount applications for use with magnetic compass. Suitable for use with Alphatron Marine and other Transmitting Magnetic compass (TMC) equipment to operate repeaters, off-course alarms and outputs to navigation equipment including gyro back up. The AlphaBinnacle with magnetic compass is Type approved according to the European Marine Equipment Directive (MED), Chinese Classification Society and other Maritime Authorities. The AlphaBinnacle can be used with a simple periscope assembly which is easy to install or removed. Due to the improved water tightness around deck/ periscope area, it reduce installation work for a shipyard. It can also be used as a standalone compass or even with an electronic device (TMC) in combination with repeaters like the AlphaLine MF Compass Repeater. The AlphaBinnacle is a lightweight GRP product which guards the Class A compass. The GRP will not influence the magnetic field of the compass. The AlphaBinnacle will be delivered with the necessary deviation correctors (including; B, C, D and H). The AlphaBinnacle with magnetic compass is Type approved according to the European Marine Equipment Directive (MED), Chinese Classification Society and other Maritime Authorities.
The AlphaBinnacle M type is for commercial vessel under 150 GT, fishing vessel and workboats under 35 meter. Professional smaller binnacle case for table top or deck mount applications for use with magnetic compass. Suitable for use with Alphatron Marine and other Transmitting Magnetic compass (TMC) equipment to operate repeaters, off-course alarms and outputs to navigation equipment including gyro back up. The AlphaBinnacle with magnetic compass is Type approved according to the European Marine Equipment Directive (MED), Chinese Classification Society and other Maritime Authorities. The AlphaBinnacle can be used with a simple periscope assembly which is easy to install or removed. Due to the improved water tightness around deck/ periscope area, it reduce installation work for a shipyard. It can also be used as a standalone compass or even with an electronic device (TMC) in combination with repeaters like the AlphaLine MF Compass Repeater. The AlphaBinnacle is a lightweight GRP product which guards the Class A compass. The GRP will not influence the magnetic field of the compass. The AlphaBinnacle will be delivered with the necessary deviation correctors (including; B, C, D and H).
REFLECTA/1/Fiberline is a reflector compass binnacle for worldwide use. It meets all important national and international specifications. Included in the range of delivery are all necessary components as magnetic reflector compass, azimuth device, reflection tube, correctors (only Flinder´s bar as extra) illumination, emergency illumination and installation material. Instead of a vertical reflection tube a horizontal by-pass up to 2m of length can be fitted.
The em-trak A200 AIS Class A sets new standards of performance, functionality and reliability. As a single, fully integrated Class A transceiver, the A200 is easily installed and configured with dual NMEA2000 and NMEA0183 connectivity allowing plug & play integration with other bridge systems. The hi-resolution full-colour display delivers a range of powerful functionality, including full CMAP ENC charting, multiple text and graphic display modes, AIS target management, proximity alerts, MOB/SAR alert and tracking and much more. Despite its unmatched performance and functionality, the A200 is ruggedized being completely water, weather and vibration proof such that it will operate reliably for years without maintenance in even the most extreme marine environments. The A200 is engineered and built for commercial users who rely on their AIS Class A day after day for their safety, security and operational efficiency
The JLR-7500/JLR-7800 (D)GPS navigator will locate your position accurately and gives you a wide range of possibilities. Integrated with the latest technologies. That will enhance your operational performance. Of the new display modes is the 3D highway, which allows you to intuitively view the location of the next waypoint. This 3D guidance is particularly valuable to follow a real-time chain of waypoints along a planned route. The new (D)GPS navigator allows you to plan long distance routes highly effective. It is possible to set Rhumb lines (RL) for short legs, while Great Circle (GC) can be set for the long distance legs. All possible within the same route. Simply make your selection for each leg to reach your destination effortlessly. All information is displayed on a highly visible 5.7-inch LCD display, featuring added sharpness and contrast compared to the previous version. Many display modes are readily available and selectable from the menu, such as navigation, CDI, highway, track plotting and service and information screens. The display has four dim modes, allowing adjusting at your own convenience.
The JLR-7600 GPS navigator will locate your position fast and with high accuracy, keeping the unit compact and easy to install. Up to 1,000 waypoints can be stored in the internal memory. All waypoints can be named and renamed up to sixteen characters. You can make 20 routes with 50 waypoints per route, which can be entered randomly, and there's room for 2,000 points for ships' track and up to 1,000 for events and marks. The JRC MID incorporates many display modes readily available on a highly visible 4.5-inch LCD display. Besides the display being fully dimmable and having backlit keys, it features dual LED backlight (white and orange), making it easy to operate in various light settings on the bridge. Multiple display modes are available from the menu with main data displayed in large characters for easy reading. You can easily switch at your own convenience, particularly useful when a situation requires specific information.
The compact JLR-8400 GPS navigator is compatible with Multi GNSS and will provide accurate position data even in Arctic area, without SBAS and beacon. The newly designed multi-GNSS sensor is capable of receiving data from GPS as well as GLONASS, QZSS or BeiDou at the same time, allowing for a highly accurate positioning without beacon and SBAS. The sensor can increase the accuracy of your position by receiving SBAS correction data. The JLR-8400 is very compact and can virtually be mounted anywhere using the desktop flush mount system. The base of the sensor is designed for an easy installation, either on a pole or on a suitable bracket. The base also includes a slot allowing for easy cable management.
