REFLECTA/2/Fiberline is a reflector compass binnacle for worldwide use. It meets all important national and international specifications. Included in the range of delivery are all necessary components as magnetic reflector compass, azimuth device, reflection tube, correctors (only Flinder´s bar as extra) illumination, emergency illumination and installation material. If a vertical reflection tube a horizontal by-pass higher than 2m of length, the REFLECTA 2 must be chosen.
REFLECTA/3 is a smaller type of reflector compass binnacle with compass card of 160mm (diameter) also for worldwide use according to regulations.
REFLECTA/4 and REFLECTA/5 are models for coastal navigation only with short binnacle columns and without bearing arrangement.
REFLECTA/4 and REFLECTA/5 are models for coastal navigation only with short binnacle columns and without bearing arrangement.
Gimballed magnetic compass with mirror arrangement and magnification lense from below. Mounted in a binnacle on wheelhouse top to be clear from interfering magnetic fields. Removable hood without window. Height of compass card above deck level is 70mm. Card diameter of compass 160mm. 24VDC illumination from above.
The AlphaBinnacle H type is for commercial vessel over 150 GT, fishing vessels and workboats over 35 meter and naval vessels. Professional binnacle case for deck mount applications for use with magnetic compass. Suitable for use with Alphatron Marine and other Transmitting Magnetic compass (TMC) equipment to operate repeaters, off-course alarms and outputs to navigation equipment including gyro back up. The AlphaBinnacle with magnetic compass is Type approved according to the European Marine Equipment Directive (MED), Chinese Classification Society and other Maritime Authorities. The AlphaBinnacle can be used with a simple periscope assembly which is easy to install or removed. Due to the improved water tightness around deck/ periscope area, it reduce installation work for a shipyard. It can also be used as a standalone compass or even with an electronic device (TMC) in combination with repeaters like the AlphaLine MF Compass Repeater. The AlphaBinnacle is a lightweight GRP product which guards the Class A compass. The GRP will not influence the magnetic field of the compass. The AlphaBinnacle will be delivered with the necessary deviation correctors (including; B, C, D and H). The AlphaBinnacle with magnetic compass is Type approved according to the European Marine Equipment Directive (MED), Chinese Classification Society and other Maritime Authorities.
The AlphaBinnacle M type is for commercial vessel under 150 GT, fishing vessel and workboats under 35 meter. Professional smaller binnacle case for table top or deck mount applications for use with magnetic compass. Suitable for use with Alphatron Marine and other Transmitting Magnetic compass (TMC) equipment to operate repeaters, off-course alarms and outputs to navigation equipment including gyro back up. The AlphaBinnacle with magnetic compass is Type approved according to the European Marine Equipment Directive (MED), Chinese Classification Society and other Maritime Authorities. The AlphaBinnacle can be used with a simple periscope assembly which is easy to install or removed. Due to the improved water tightness around deck/ periscope area, it reduce installation work for a shipyard. It can also be used as a standalone compass or even with an electronic device (TMC) in combination with repeaters like the AlphaLine MF Compass Repeater. The AlphaBinnacle is a lightweight GRP product which guards the Class A compass. The GRP will not influence the magnetic field of the compass. The AlphaBinnacle will be delivered with the necessary deviation correctors (including; B, C, D and H).
REFLECTA/1/Fiberline is a reflector compass binnacle for worldwide use. It meets all important national and international specifications. Included in the range of delivery are all necessary components as magnetic reflector compass, azimuth device, reflection tube, correctors (only Flinder´s bar as extra) illumination, emergency illumination and installation material. Instead of a vertical reflection tube a horizontal by-pass up to 2m of length can be fitted.
REFLECTA / 1 / Fiberline é uma agulha magnética para uso em todo o mundo. A mesma atende a todas as importantes especificações nacionais e internacionais. Estão incluídos na faixa de fornecimento todos os componentes necessários, como bússola de refletor magnético, dispositivo de azimute (alidade), tubo periscópio, corretores (apenas a barra de Flinder como extra), iluminação, iluminação de emergência e material de instalação. Ao invés de um tubo de reflexão vertical, um desvio horizontal de até 2 m de comprimento pode ser instalado.
REFLECTA / 2 / Fiberline é uma agulha magnética para uso em todo o mundo. A mesma atende a todas as importantes especificações nacionais e internacionais. Estão incluídos na faixa de fornecimento todos os componentes necessários, como bússola de refletor magnético, dispositivo de azimute (alidade), tubo periscópio, corretores (apenas a barra de Flinder como extra), iluminação, iluminação de emergência e material de instalação. Se for necessário um desvio horizontal superior à 2 m de comprimento, o REFLECTA 2 deve ser escolhido.
