MH550-H Electric

The Ibuki MH550H Piston horn is electrically driven, and employs a motor to drive reciprocating piston mechanism to produce a powerful tone. The motor is only operated on blowing for low power consumption. MH550H is just required electical wiring without pneumatic connections for installation on foremast. Heater and snow guard are available for use in cold area.

2020-06-10T16:19:45-03:0022/04/2020|

AlphaPilot MFM

Our new adaptive autopilot which features a 5-inch touch display with the hardware and software based on our uniform product philosophy, creating a consistent bridge and operational approach. The advanced track steering technology contributes to safe and efficient operation, defined by its simplicity in usage. The idea behind our new AlphaPilot was to design a modular system with standard components that also makes it easy to service. Due to our experience and feedback of our customers and engineers, our main goal was to design an autopilot that is easy to install, commission and to maintain. The new AlphaPilot had to be deployable as a small system as heading control system up to an advanced and complex autopilot system with multiple positions and to control main steering. The AlphaPilot is a modular, type approved heading control system designed to fit vessels of any size, including high speed crafts. This modern and technologically advanced control unit is intended to reduce the operator’s workload, increase the vessel motion efficiency and improve operational safety. The AlphaPilot is easy to install and has a fully self-adjusting ‘auto-tune’ algorithm which automatically estimates ships’ dynamics and allows it to easily adapt control settings, rudder gain and counter rudder as required to continually provide the best possible steering performance. The tillers are required for steering and switches for selecting steering modes. As an additional safety feature, the tiller in command will lit. All tillers and switches have dimmer and mute buttons. The modules have an aluminum base fitted with a dedicated PCB and a splash-proof film coating on the front. The modules are connected via CAN bus for communicating with the main control unit.

2020-06-10T16:00:19-03:0022/04/2020|

AlphaSeaPilot

Designed and developed for professional use on Magnetic and/or Gyro based vessels of all types – including High Speed Craft (HSC). The adaptive ALPHASEAPILOT installation, make ALPHATRON, is a technologically advanced and powerfully equipped Autopilot which is clearly displayed and simple to operate. The Alphaseapilot is MED type Approved for HSC & Conventional ISO 16329 & 11674/IMO A342 (IX) Deep Hull Vessels – Notified Body 0191 /07 as amended by MSC 64/67 Annex 3 Equally at home in new build and retrofit applications over an exceptionally wide range (fishing vessels, tugs, dredgers, ferries, coasters, survey and patrol vessels etc.) the ALPHASEAPILOT offers traditional Alphatron Marine reliability reinforced by Adaptive control technology. The adaptive function automatically monitors and self-tunes the Autopilot parameters to provide optimum steering performance whether operating on a fishing vessel in a low speed work mode or on a high speed passenger ferry underway at 40 knots.

2020-06-10T16:24:22-03:0022/04/2020|

Pilotstar NX

The PilotStar® NX offers superior steering performance, thanks to decades of experience with its predecessor PilotStar D and the proven Anschütz steering algorithms. PilotStar NX also stands out with an extended range of functionality and an intuitive operation via the seven-inch touch TFT display. The autopilot is approved as heading control system for standard and for high-speed crafts. The PilotStar NX includes latest technical developments such as Ethernet communication and bridge alert management – this makes PilotStar NX easy to integrate into various system environments.

2020-06-09T14:13:24-03:0022/04/2020|

AlphaSSRS

The AlphaSSRS is a complete Sound Signal Reception System (SSRS) consisting of a display and antenna, designed to receive and detect foghorn sounds from other vessels and is for use onboard one-man operated enclosed bridge class ships. The display features an adjustable volume and dimmer and is highly suitable for fore and aft bridge mounting. The sound reception system enables the watch officer to receive warning signals of nearby vessels within a 70 to 2100 Hz frequency from all directions and suppresses unwanted background noise allowing reception of only relevant sounds. A secured web interface is used for logging and configuring the system. It also provides the system status, making it is easy to get access to settings, parameters and errors of the sound signal reception system which can save time during trouble shooting. At the same time, the website interface allows you to easily maintain the system for firmware updates, reset or factory restore functions.

2020-06-10T16:31:27-03:0022/04/2020|

SRS400

The Ibuki Kogyo Sound Reception system is mandatory equipment in accordance with the revisions to SOLAS Chap.V effected on 2002. buki SRS is complied with the new regulation to support the maritime safety. Main funciton is to receive external acoustic signals, reproduce and indicate the direction on the bridge. The microphone unit is fully waterproof and durable structure in all weather conditions. SRS100 is combined four microphones in one unit, and the SRS400 is four separate microphones. Both are simple wiring and maintenance-free. The working voltage is DC24V as standard, AC100V and AC220V are available as option with a converter.

2020-06-09T16:22:06-03:0022/04/2020|

SRS100

The Ibuki Kogyo Sound Reception system is mandatory equipment in accordance with the revisions to SOLAS Chap.V effected on 2002. buki SRS is complied with the new regulation to support the maritime safety. Main funciton is to receive external acoustic signals, reproduce and indicate the direction on the bridge. The microphone unit is fully waterproof and durable structure in all weather conditions. SRS100 is combined four microphones in one unit, and the SRS400 is four separate microphones. Both are simple wiring and maintenance-free. The working voltage is DC24V as standard, AC100V and AC220V are available as option with a converter.

2020-06-09T16:23:26-03:0022/04/2020|